Piecemaker Pollen Presser
Piecemaker Pollen Presser
The Piecemaker is the ultimate pollen pressing kit.
A heavy-duty piece of equipment, the Piecemaker compresses your pollen into a compact block.
Perfectly manufactured stainless steel press
100% tasteless and food-safeExtremely high-grade steel (X10CrNis189)
3,000 kg maximum pressure - no deformation of the materialNo loss of material
Tenth-of-a-millimetre exact fitRolled thread
No abrasion - no metal pieces
3,000 kg maximum pressure - no deformation of the material
No loss of material
Tenth-of-a-millimetre exact fitRolled thread
No abrasion - no metal pieces
No abrasion - no metal pieces
The Piecemaker is a precisely manufactured compression-press made of food-safe high-grade steel.
The extremely hard X10CrNis189 stainless steel has been used to avoid abrasion (high pressure warp resistant, abrasion-proof thread)
The rolled thread made from the same type of stainless steel provides for an incredible 3,000 kg pressure (at maximum).
Due to the Piecemaker's patented design (reg. no. 210313), an optimal heat supply is possible before or during the pressing process without deteriorating the material.
No material is wasted due to the tenth-of-a-millimeter-exact fit.
It only needs two simple movements to take the Piecemaker apart for cleaning.
Why Pressing?
- to obtain a protecting outer layer
- to avoid impurities
- to remove moisture
Out of stock
Free shipping on US orders above 50USD
Easy Returns
Over 61K+ positive reviews
Description
Specifications
Description
Piecemaker Pollen Presser
"Pressing" means to use heat and pressure to compress the material into one compact piece. Through this process the remaining moisture is removed and the density (important for the rate of combustion) is determined. It also makes transport and consumption a lot easier.
By using state-of-the-art screening methods (for example, Pollinator or Ice-O-Lator) everyone can produce highest-quality resin powder today. It's not just an expert business anymore! To avoid impurities in the material gentle pressing is a must. Gentle mechanical pressing is the only way to provide for a crusty surface, which protects the material from oxidation and consequently also from the decay of the active agent.
When resin is pressed without too much heat exposure (the most efficient way is to use a hairdryer), hardly any resin glands will burst and the natural coloring of the high-quality crystals won't change.
However, gentle heat of 75° Celsius maximum is required, since fresh THC contained in the material comes as acid and, in its chemically neutral form, needs to be activated to take the desired psychoactive effect.
Specifications
| SKU | ACC-316 |
|---|---|
| Size | 135mm x 35mm |
All products on this site are intended for tobacco or legal dry herb usage