MILKYWAY Emperor's Legacy Wet Ash Catcher 90° Degree/Male-14mm

‌About the Product 

The Emperor's Legacy is a wet ash catcher by Milkyway Glass that helps keep your bong clean and cools your smoke. It is designed for water pipes that have a 14mm female joint at a 45-degree angle, making it a great fit for most beaker-style bongs. 

What Is The Emperor’s Legacy Ash Catcher? The Milkyway Emperor’s Legacy is an accessory for your water pipe that adds another layer of filtration. As a "wet" ash catcher, it uses a little water to catch ash and resin before they can make your main piece dirty. This helps keep the water in your bong cleaner for longer and makes for a smoother experience. 

This model is made to fit pieces that have a 14mm female joint and a 45-degree angle. Made from clear and smoke-colored borosilicate glass, it shows off the classic Emperor's Legacy design. It's a functional and stylish addition to your setup. 

Adds a layer of water filtration for cooler, smoother hits. Traps ash and debris, keeping your bong water cleaner. Fits a common 14mm joint size and 45-degree angle. Made from durable borosilicate glass that is easy to clean. 

Show More Product Specifications What Specs Matter For A Cleaner Session? Understanding the details of this ash catcher ensures it will fit your water pipe and work as you expect. 

Each feature is designed to make your sessions better and cleaning easier. Here are the key specs for this piece. 

Spec Value Buyer Benefit Joint Size 14mm Male / 14mm Female Ensures a standard, snug fit for most 14mm bowls and water pipes. 

Joint Angle 45 Degrees Positions the ash catcher correctly on most beaker bongs. 

Material Borosilicate Glass Offers high durability against heat, making it strong and simple to clean. 

Type Wet Ash Catcher Uses water to filter smoke and trap debris for a smoother draw. Height 5 inches Provides good filtration volume without making your piece unstable. The mix of a 14mm joint, 45-degree angle, and borosilicate build creates a compatible, durable, and effective upgrade. 

The 14mm joint is one of the most common sizes in the industry. A 45-degree angle is designed to keep the bowl upright on angled stems. Borosilicate glass is known for its strength and heat resistance. A wet ash catcher offers more filtration than a dry one. 

Key Features And Design 

What Does A Wet Ash Catcher Do? A wet ash catcher does two main things. First, it works as a pre-filter, catching ash and resin in its own chamber. Second, because it holds water, it starts cooling the smoke before it even gets to your main water pipe. This gives you a cleaner, smoother hit and means you don't have to clean your bong as often. 

How Does The Design Improve Your Experience? The Emperor's Legacy design is functional, not just stylish. Its 5-inch height and chamber size give good filtration without adding too much drag or making your piece easy to tip over. 

The clear glass lets you see when the water needs to be changed, while the sandblasted design adds a unique look. It's a practical upgrade that also makes your setup look better. This accessory filters and cools smoke while trapping debris, all in a balanced and visually appealing design. It provides pre-filtration to keep your main water pipe cleaner. 

The extra water diffusion helps cool smoke for a smoother inhale. Its 5-inch height is a good balance between function and stability. 

The Emperor's Legacy design is a unique visual upgrade. How To Use And Set Up Your Ash Catcher How Much Water Should I Add To This Ash Catcher? Using the right water level is key for great performance. Add just enough water to cover the bottom of the downstem or any percolator slits inside. 

A good rule of thumb is to fill it about one-quarter of the way up. Don't overfill it, as this can cause water to splash into your main piece. 

What Are The Steps For Setting It Up? Setting up your new ash catcher is a simple process. Follow these steps to get started correctly. 

Rinse: Before the first use, rinse the ash catcher with warm water to remove any dust. 

Fill: Add a small amount of cool water, just enough to cover the internal percolator. 

Attach: Carefully insert the ash catcher’s male joint into the 14mm female joint on your 45-degree water pipe. 

Insert Bowl: Place your 14mm male bowl into the top joint of the ash catcher. 

Test Draw: Take a gentle pull without lighting anything to check the airflow and make sure no water splashes up. 

Enjoy: Your ash catcher is now ready to use. Setup is quick, involving a rinse, a little water, and checking the connection before you start. 

Only add enough water to cover any percolation slits. Overfilling can lead to water splashing into your main bong. Always test the airflow gently before your first real use. Make sure all connections are snug to prevent air leaks. 

How To Care For And Clean Your Ash Catcher 

How Do I Clean This Ash Catcher? Cleaning your ash catcher is much easier than cleaning your entire bong. For the best results, change the water daily. To deep clean it, just empty the old water, add a mix of isopropyl alcohol (91% or higher) and coarse salt, cover the openings, and shake gently for a minute or two. 

Then, rinse it well with warm water. Daily water changes and a weekly clean with alcohol and salt will keep it working and looking great. Change the water in your ash catcher every day to prevent buildup. Use a mixture of isopropyl alcohol and salt for a deep clean. Shake for 60 to 120 seconds to get rid of stubborn resin. Rinse completely with hot water after you finish cleaning. 

Pre-Use Checklist And Post-Session Tips 

What Should I Check Before My First Use? Before you attach your new ash catcher, run through this quick checklist. It helps ensure a perfect fit and function while avoiding common issues like a wobbly connection or a poor seal. 

Joint Size: Confirm your water pipe has a 14mm female joint. 

Joint Angle: Make sure your piece has a 45-degree joint so the ash catcher sits upright. Clearance: Check that there is enough space so the 5-inch ash catcher doesn't hit the base. Water Level: Fill the catcher with just enough water to cover the perc, but no more. 

Seal Test: Attach everything and do a dry pull to check for a tight seal with no air leaks. Checking your bong's joint size, angle, and clearance ahead of time will guarantee a perfect, stable fit. 

Verify both the size (14mm) and angle (45°) of your bong's joint. 

Ensure there is enough physical space for the accessory. A proper seal is important for good performance. A quick check can prevent frustrating setup problems.